NEC ElectraElite 48 System Hardware Manual page 12

GENERAL
INFORMATION
COMPANY
NOTIFICATION
System Hardware Manual
Regulatory Information
Established Federal Communications Commission (FCC) rules permit this
telephone system to be directly connected to the telephone network. A jack is
provided by the telephone company. Jacks for this type of customer provided
equipment are not provided on party lines or coin lines.
When the telephone company makes changes in its technical operations and
procedures that affect the compatibility or use of the Electra Elite system, it is
required to give adequate notice of the changes.
Before connecting this telephone system to the telephone network, the
following information must be provided to the telephone company:
1. Your telephone number.
2. FCC registration number:
When the system is to be installed as a Key Function system (no dial
access to Trunk Groups/Route Advance Blocks), use the following
number:
NIFMUL-43074-KF-E
When the system is to be installed as a Multifunction system, use the
following number:
NIFMUL-43076-MF-E
When the system is to be installed as a PBX System, use the
following number:
NIFMUL-43075-PF-E
Ringer Equivalence Number (REN): 2.0B
USOC jack required: RJ21X
1