Figure 8-9 Connecting A Dth/Dtr Terminal To The System; Figure 8-10 Leading Line Cord On A Dth/Dtr Terminal - NEC ElectraElite 48 System Hardware Manual

Electra Elite
S 4
ECTION
C DTH/
ONNECTING
DTR S
TO THE YSTEM
System Hardware Manual
To connect a DTH/DTR Multiline Terminal Multiline to the system
proceed as follows:
1. Plug the telephone cord in the modular jack on the bottom
side of the Multiline Terminal. The handset is also attached
to the bottom side of the Multiline Terminal.

Figure 8-9 Connecting a DTH/DTR Terminal to the System

2. Attach the telephone cord through the groove shown on
Figure 8-10 Leading Line Cord on a DTH/DTR

Figure 8-10 Leading Line Cord on a DTH/DTR Terminal

Issue 6
Terminal.
8 - 9