Figure 6-28 D Term Analog Cordless Terminal; Selecting An Installation Location - NEC ElectraElite 48 System Hardware Manual

Electra Elite
S 12
ECTION
term
I D
NSTALLING A
A C
NALOG ORDLESS
T
ERMINAL
System Hardware Manual
®
12.1

Selecting an Installation Location

Select a location to avoid excessive heat or humidity. The base
unit should be placed on a desk or tabletop near a standard 120
Vac outlet and within reach of the telephone line connection on the
Electra Elite Multiline Terminal.
handset away from sources of electrical noise (e.g. fluorescent
lighting).
12.2 Connecting the Telephone Cord
The DTR-1R-1 D
analog port on the KSU using an SLI(4)/(8)-U( ) or OPX(2)-U( )
ETU, SLT(1)-U( ) ADP, or APR-U Unit connected to the multiline
terminal. A TEL LINE jack is located on back of the base unit of the
term
D Analog Cordless terminal.
Never install telephone wiring during a lightning storm.
term
Figure 6-28 D Analog Cordless Terminal
term
Analog Cordless terminal is connected to an
Observe the following
installation.
Keep the base unit and the
warnings
Issue 6
during
6 - 25