Figure 7-38 Connecting Dbm(B)-U( ); Connecting The Dbm(B) To Power And Esi - NEC ElectraElite 48 System Hardware Manual

Issue 6
7 - 30
4. Tighten the top screw on the DBM(B)-U( ) Box.
When four or five expansion boards are used,
install the bottom screw on the middle unit as well.
3.7.3

Connecting the DBM(B) to Power and ESI

1. Refer to
Connect
DBM(B)-U10.

Figure 7-38 Connecting DBM(B)-U( )

2. Connect the line cable to the DBM(B)-U( ).
3. Place the clamp around the cables, insert the clamp
screw, and attach clamp to the DBM(B)-U( ).
4. Refer to
Port, and connect the display board system to ESI.
Figure 7-38 Connecting DBM(B)-U(
the provided AC
Figure 7-39 Connecting DBM(B)-U( ) to ESI
Installing Optional Equipment
Electra Elite
), and
Adapter to the