Figure 7-65 Music Source Connections; Music On Hold - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
3.13

Music on Hold

The Electra Elite 48 KSU allows a Music on Hold source to be
connected to the Electra Elite 48 system. Both internal and
external music sources can be used. When an internal music
source is used (digital music), external music on hold is not
available.
3.13.1 Connecting Audio Sources to the KSU
Connect the plug end to the MOH IN jack on the
MBD-U10 Unit in the KSU.
MOH

Figure 7-65 Music Source Connections

3.14 Station Background Music
Station Background Music can be provided using an internal or an
external source. The same connection method used for Music on
Hold is used for Station Background Music.
3.15 External Page Output
Electra Elite 48 KSU pins 25 and 50 are used to connect a single
zone of paging. The ECR-U( ) ETU must be installed for External
Tone Ringer, Background music over External Speakers, External
Paging with more than one zone, or Night Chime. Refer to
7-66 External Page
For more information on the ECR-U( ) ETU, refer to Chapter 5,
Section 6.4 ECR-U( )
Audio Shielded
Cable
IN
Output.
ETU.
Issue 6
Voice Message or
Output
any Music Source
Power
Terminal
Figure
7 - 49