Figure 7-44 Connecting A Single Line Telephone To The System Using An Slt(1)-U( ) Adp; Connecting A Mic/Line-In - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
3.9.1

Connecting a MIC/Line-In

3.10 SLT(1)-U( ) ADP (Single Line Telephone)
The Single Line Telephone adapter provides an interface for Single
Line Telephones and other similar devices from an ESI ETU
channel. This adapter can be connected to any ESI port.
3.10.1 Connecting the SLT(1)-U( ) ADP to the System
1.
2.
Figure 7-44 Connecting a Single Line Telephone to the
When using the microphone input (MIC), connect an
electric condenser microphone. Phantom power
(-2.2 Vdc) is supplied.
When using the line-level input (Line-In), connect to
a line-level device such as a CD or cassette player.
Connect one end of the RJ-11 to the ESI port on the
KSU and one end to the ESI jack on the SLT
Adapter.
Connect one end of a second RJ-11 to the TEL jack
on the SLT Adapter and the other end to the Single
Line Telephone.
SLT(1)-U10 ADP
RJ-11
2-wire
System using an SLT(1)-U( ) ADP
RJ-11
2-wire
ESI
Issue 6
7 - 35