Figure 7-10 Attaching The Ada-U Unit To The Multiline Terminal; Ada-U Unit (Ancillary Device Adapter) - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
3.2

ADA-U Unit (Ancillary Device Adapter)

Ancillary Device Adapters allow connection of a tape recorder to all
DTP/DTU Multiline
DTP-16HC-1.
When installing an ADA-U Unit, first connect the cables to the
ADA-U Unit, set the dip switches, and then install the ADA-U Unit
on the Multiline Terminal.
3.2.1 Installing an ADA-U Unit on a Multiline Terminal
1.
2.
3.
4.
5.
Terminals except
Unplug the telephone cord from the Multiline
Terminal.
Prepare Multiline Terminal for adapter installation.
Refer to Section 2 Preparing Multiline Terminal for
Adapter Installation.
Press both sides of Base Cover to release latches,
lift base cover, and rotate it left to remove it.
Plug the ADA-U Unit connector into the receptacle
connector on the back of the Multiline Terminal.
Snap the ADA-U Unit into the hooks on the Multiline
Terminal to secure it.
Figure 7-10 Attaching the ADA-U Unit to the Multiline
Terminal
Replace cover and base plate.
Issue 6
for DTP-2DT-1 and
7 - 7