Connecting A Dtu/Dtp Terminal To The System; Figure 6-11 Connecting A Multiline Terminal To The System; Figure 6-12 Leading Line Cords On A Multiline Terminal - NEC ElectraElite 48 System Hardware Manual

Electra Elite
S 4
ECTION
C DTU/
ONNECTING A
DTP T
ERMINAL TO THE
S
YSTEM
System Hardware Manual
These instructions for connecting a Multiline Terminal to the system
apply to all of the Electra Elite Multiline Terminals.
1. Plug the telephone cord in the modular jack on the bottom
side of the Multiline Terminal. The handset is also attached
to the bottom side of the Multiline Terminal.

Figure 6-11 Connecting a Multiline Terminal to the System

2. Lead the telephone and handset cords through the
appropriate grooves.

Figure 6-12 Leading Line Cords on a Multiline Terminal

Issue 6
6 - 11