Table of Contents
Advertisement
Electra Elite
System Hardware Manual
3.5.1
Installing the CTA-U Unit
1.
Prepare Multiline Terminal for adapter installation.
Refer to
Adapter
2.
Plug the unit into the receptacle connector inside the
base plate on the Multiline Terminal. Refer to
7-27 Attaching the Unit to the Multiline
Figure 7-27 Attaching the Unit to the Multiline Terminal
3.
Close the base plate.
Section 2 Preparing Multiline Terminal for
Installation.
Issue 6
Figure
Terminal.
7 - 21
Advertisement
Table of Contents
