Figure 7-50 Positioning The Handset Hanger; Figure 7-51 Removing The Knockout; Wall Mounting Using The Base Unit - NEC ElectraElite 48 System Hardware Manual

Issue 6
7 - 40

Figure 7-50 Positioning the Handset Hanger

3.12.2

Wall Mounting Using the Base Unit

1. Refer to
Adapter
2. Press both sides of the Base Cover, and turn it left to
remove it.
3. Rotate base cover 180° and install it again on the
Multiline Terminal.
4. Remove the shaded base plate knockout that is
shown on
Section 2 Preparing Multiline Terminal for
Installation, and perform Steps 1~5.
Figure 7-51 Removing the

Figure 7-51 Removing the Knockout

Installing Optional Equipment
Electra Elite
Knockout.