Figure 8-46 Dsw Switch Settings For Sending Voice Calls To Terminal; Figure 8-47 Connections For Sending Calls To The Terminal; Figure 8-48 Removing Cover; Installing Core And Shielded Cable - NEC ElectraElite 48 System Hardware Manual

Issue 6
8 - 36
3. When sending recorded calls to the terminal, Set the
DSW Switch to settings shown in
Switch Settings for Sending Voice Calls to Terminal
and connect wiring to recorder as shown in
8-47 Connections for Sending Calls to The

Figure 8-46 DSW Switch Settings for Sending Voice Calls to Terminal

Figure 8-47 Connections for Sending Calls to The Terminal

14.2.2

Installing Core and Shielded Cable

1. Remove the screw shown on
Cover, and carefully open the AD(A)-R Unit.
Installing Electra Elite IPK and D
Figure 8-48 Removing

Figure 8-48 Removing Cover

term
Electra Elite
Figure 8-46 DSW
Figure
Terminal.
Series i Equipment