Table of Contents
Advertisement
Issue 6
4 - 2
The information obtained at the customer site permits the installer
to partially assemble the MDF before installing it at the customer
premise. This reduces installation time and downtime at the
customer site.
2.3
Selecting the Best Location for Proper Installation
2.3.1
Selecting the KSU Installation Site
When a site is selected for the installation of the KSU,
consider the following conditions to ensure proper
installation.
The KSU is wall mounted to protect against
accident or flooding.
The KSU should not be located directly beneath
pipes.
Leaks or condensation could damage the
Electra Elite 48 system equipment.
The area where the KSU is located must be free of
corrosive
and
inflammable
chemical or industrial dusts, and other materials that
could cause a hazard to personnel or to the proper
functioning of the equipment.
The operating ambient temperature and humidity
must be within the limits specified in 4.2.2
Environmental Conditions in
Specifications.
System operation is virtually noiseless and allows
wide selection of installation sites. Ensure that the
KSU does not present a hazard to office traffic. To
minimize cabling costs, a centralized location
should be chosen.
The KSU must be located where it can easily be
connected to a dedicated AC power source.
Connect the KSU only to a dedicated AC
receptacle that is not being used for any other
device such as a computer, copier, or facsimile
machine.
Electra Elite
gases,
excessive
Chapter 2 System
Installing the KSU
Advertisement
Table of Contents
