Table of Contents
Advertisement
Electra Elite
System Hardware Manual
5.6.8
Connectors
The VMS/FMS/CMS(2)/(4)/(8)-U30 has six Connectors:
J2
Connects to the backboard
J6
Connects to Compact Flash (FMS only).
J8
Connects to the Harddrive
J9
Connects to the LAN when used (VMS only)
J10 Not Used
J11 COM Port for console programming
J12 Connector for DSP-U30 Unit to support ports
5~8
5.6.9
Installation Precautions
The ETUs used in this system make extensive use of
CMOS technology that is very susceptible to static
electricity.
Static discharge must be avoided when handling
ETUs.
Always use the following precautions:
Wear a grounding strap anytime you handle
the ETU.
Make all ETU DIP switch setting changes
before inserting it in the KSU. Ensure that
KSU is off.
Carry ETU in a conductive polyethylene bag to
prevent static electricity damage.
Issue 6
5 - 81
Advertisement
Table of Contents
