Figure 6-22 Adjusting The Dtu/Dtp Line Cord Length; Figure 6-23 Lowering The Base Plate On The Dtu/Dtp Multiline Terminal - NEC ElectraElite 48 System Hardware Manual

Electra Elite
System Hardware Manual
3. The length of the cord can be adjusted by pulling the line cord
though the groove in the bottom of the Multiline Terminal.

Figure 6-22 Adjusting the DTU/DTP Line Cord Length

4. To lower the base plate on the Multiline Terminal, push on the
adjustment tabs and push the base plate downward.

Figure 6-23 Lowering the Base Plate on the DTU/DTP Multiline Terminal

Issue 6
Tab
6 - 19