Vms/Fms/Cms( )-U30 Etu; Description; Installation - NEC ElectraElite 48 System Hardware Manual

Table of Contents

Advertisement

Issue 6
5 - 76
5.6

VMS/FMS/CMS( )-U30 ETU

5.6.1

Description

The EliteMail VMS, VMS( )-U30 ETU, is a 2-port, 4-port,
or 8-port interface that can be installed in any interface
slot in the Electra Elite system.
configuration includes one digital signal processor (DSP);
the 8-port configuration requires an additional DSP-30
Unit.
The EliteMail Limited, FMS( )-U30 ETU, is a 2-port, 4-
port, or 8-port interface that can be installed in any
interface slot in the Electra Elite system. The 2-port or 4-
port configuration includes one digital signal processor
(DSP); the 8-port configuration requires an additional
DSP-30 Unit.
The EliteMail CMS, CMS( )-U30 ETU, is a 2-port, or 4-
port interface that can be installed in any interface slot in
the Electra Elite system.
This electronic telephone unit is a PC platform installed in
the Electra Elite system and contains hard disk space for
voice recording storage and application software.
digital signal processor/voice processing section handles
the following functions:
DTMF detection
DTMF generation
General tone detection
FAX CNG tone detection
PCM compression for audio recording/playback
Automatic gain control (AGC)
A serial port capable of direct connect speeds up to 38.4
Kbps.
The number of EliteMail ports installed has a direct
impact on the total number of system ports available.
5.6.2

Installation

Only one VMS/FMS/CMS-U30 ETU can be installed in
slots S2~S7 slot in each system. Slot 7 is recommended.
The 2-port or 4-port
Installing Electronic Telephone Units
Electra Elite
A

Advertisement

Table of Contents
loading

Table of Contents