Installing Dtu/Dtp Line Cards And Plastic Panels; Line Card And Plastic Panel Installation; Figure 6-16 Installing Line Card And Plastic Panel On Dtu/Dtp Multiline Terminal - NEC ElectraElite 48 System Hardware Manual

Issue 6
S 7
ECTION
I DTU/DTP
NSTALLING
L C
INE ARDS AND
P P
LASTIC ANELS
6 - 14
7.1

Line Card and Plastic Panel Installation

Line key designations are entered on the Line Card that is then
placed on the Multiline Terminal to provide a quick reference of key
designations. The Line Card can be changed as necessary. The
Plastic Panel is placed on top of the Line Card to hold it in place.
1. Place the Line Card over the keys on the Multiline Terminal.
2. Place the tabs on the bottom of the plastic panel in the
grooves at the terminal bottom, and press top right and left
ends to secure plastic panel to the Multiline Terminal. Refer to
Figure 6-16 Installing Line Card and Plastic Panel on DTU/
DTP Multiline
Figure 6-16 Installing Line Card and Plastic Panel on DTU/DTP
Terminal.
Multiline Terminal
Installing Electra Elite Multiline Terminals
Electra Elite