Installing Built-In And External Batteries In The Ksu; Built-In Battery Installation; Figure 4-15 Connecting Built-In Batteries; Figure 4-16 Installing Batteries In The Ksu - NEC ElectraElite 48 System Hardware Manual

Issue 6
4 - 20
3.8

Installing Built-In and External Batteries in the KSU

3.8.1

Built-In Battery Installation

1.
2.
3.
Connect the two batteries in series as shown in
Figure 4-15 Connecting Built-In
cord attaches to the red terminal and the black cord
attaches to the black terminal.
Be careful not to misconnect the
terminals of the batteries.

Figure 4-15 Connecting Built-In Batteries

Slide the batteries into the bottom space at the left
side the KSU, and install the battery cover as shown
in Figure 4-16 Installing Batteries in the

Figure 4-16 Installing Batteries in the KSU

Connect the cable to the BATTERY INT connector
of the PSU as shown in
Batteries to the Power Supply
Electra Elite
Batteries. The red
KSU.
Figure 4-17 Connecting the
Unit.
Installing the KSU