Figure 8-51 Attaching The Ad(A)-R Unit To The Multiline Terminal; Table 8-2 Ad(A)-R Cable Connections; Installing The Ad(A)-R Unit On A Dth/Dtr Multiline Terminal - NEC ElectraElite 48 System Hardware Manual

Issue 6
8 - 38
14.2.3 Installing the AD(A)-R Unit on a DTH/DTR Multiline
Terminal
1. Unplug the telephone cord (and the AC-R Unit cord
if installed) from the Multiline Terminal.
2. Prepare Multiline Terminal for adapter installation.
Refer to
Terminal for Adapter
3. Plug the A and B tabs in adapter slots as shown on
Figure 8-51 Attaching the AD(A)-R Unit to the
Multiline
until it clicks into place.

Figure 8-51 Attaching the AD(A)-R Unit to the Multiline Terminal

4. Install the Base Cover and the line cord.
14.2.4 AD(A)-R Connections and Specifications

Table 8-2 AD(A)-R Cable Connections

connections list and describes the specifications for the
AD(A)-R Unit.
Installing Electra Elite IPK and D
Section 13 Preparing DTH/DTR Multiline
Installation.
Terminal, and press down on the adapter
Electra Elite
provides a cable
term
Series i Equipment