Table of Contents
Advertisement
Issue 6
6 - 26
Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
Use caution when installing or modifying telephone lines.
Using the telephone line cord supplied with the D
Cordless terminal, connect the TEL LINE to the telephone line.
12.3
Applying Power to the Base Unit
1.
Plug the AC Adapter connector in the DC IN 9V jack.
2.
Route the power cord where it does not create a trip hazard
or where it could become chafed and create a fire or other
electrical hazards.
3.
Plug the AC
The AC Adapter furnished with this phone should be
equipped with a polarized line plug (one blade is wider than
the other). This plug fits into the power outlet only one way.
When you cannot insert the plug fully into the outlet, reverse
the plug.
facilities coordinator about replacing the obsolete plug. Do
not alter the shape of the blades of the polarized plug.
in a standard 120 Vac wall outlet.
Adapter
When the plug still does not fit, contact your
Installing Electra Elite Multiline Terminals
Electra Elite
term
Analog
Advertisement
Table of Contents
