Hard Disk Drive Cable Connection - IBM Storwize V7000 Unified Problem Determination Manual

Figure 56. Hard disk drive cable connection
Port 4-7
Removing the battery
The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
your request, you will be charged for the installation. Service agreements can be
purchased so that you can ask IBM to replace these units.
About this task
Note: Before running a procedure, refer to "Removing a file module to perform a
maintenance action" on page 91.
The following notes describe information that you must consider when replacing
the battery:
v IBM has designed this product with your safety in mind. The lithium battery
v If you replace the original lithium battery with a heavy-metal battery or a
Port 0-3
Port 4-7
must be handled correctly to avoid possible danger. If you replace the battery,
you must adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
battery with heavy-metal components, be aware of the following environmental
consideration. Batteries and accumulators that contain heavy metals must not be
Port 0-3
SAS signal cables
131
Chapter 4. File module