IBM Storwize V7000 Unified Problem Determination Manual page 452

424
Storwize V7000 Unified: Problem Determination Guide 2073-720
Table 120. Upgrade error codes and recommended actions (continued)
Error
Code Explanation
01D3 Could not determine if backups are
running.
01D5 Storwize V7000
stalled_non_redundant.
01D6 Storwize V7000 System stalled.
01D8 CTDB cluster is unhealthy.
01DA GPFS system is unhealthy.
01DB Failed to stop performance center.
01DC Failed to configure performance
center.
01DD Failed to start performance center.
01DE Unable to communicate with
passive management node.
01DF Upgrade must be resumed from the
other management node.
01E0 HSM upgrade failed.
01E1 mmchconfig Failed
01E2 mmauth Failed
01E3 mmlsfs Failed
01E3 mmchfs Failed
01E4 Disable HSM failed
01E5 Enable HSM failed
Action
1. Attempt to stop backups.
2. Type lsjobstatus -j backup;echo $?.
If the return code is 0, start the
upgrade again.
3. If the return code is any other
number, contact IBM Remote
Technical Support.
Refer to Storwize V7000 documentation.
Refer to Storwize V7000 documentation.
1. See "Checking CTDB health" on page
187.
2. Use lshealth or RAS procedures to
determine unhealthy components.
3. Contact IBM Remote Technical
Support.
1. See "Checking the GPFS file system
mount on each file module" on page
189.
2. Use lsnode -r to confirm GPFS is
unhealthy. If node GPFS is healthy,
restart the upgrade.
3. Contact IBM Remote Technical
Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
1. Ensure that the active mgmt node can
communicate with the passive
management node before restarting
the upgrade.
2. Contact IBM Remote Technical
Support.
Restart upgrade from other management
node. This might require that a failover
be issued first.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.
Contact IBM Remote Technical Support.