Usb Ports On The Storwize V7000 Gen2 Node Canister - IBM Storwize V7000 Unified Problem Determination Manual

Figure 23. USB ports on the Storwize V7000 Gen2 node canister
The USB ports have no indicators.
Storwize V7000 2076-524 host interface adapter ports and
indicators
An 8 Gbps or 10 Gbps host interface adapter can be installed in each node canister.
Storwize V7000 2076-524 Fibre Channel host interface adapter ports and
indicators:
If you specified Fibre Channel host interface adapters for your Storwize V7000
2076-524 system, an adapter is preinstalled in each node canister.
Each 8 Gbps Fibre Channel 4-port host interface adapter (feature code ACHK) can
have from two to four short wave (SW) small form-factor pluggable (SFP)
transceivers installed. Cap unused ports with safety caps.
Fibre Channel host interface adapter ports
Fibre Channel ports 1 are in 1 - 4 order, starting at the top. Ports and their
indicators are shown in Figure 24 on page 22.
Each port can have up to an 8 Gbps SW SFP transceiver installed. Each transceiver
connects to a host or Fibre Channel switch with an LC-to-LC Fibre Channel cable.
3
1 2
1 Ethernet ports. The technician port is labeled T. It is used for
troubleshooting or servicing the system.
2 Serial-attached SCSI (SAS) ports.
3 USB ports. Each canister has two USB ports.
Chapter 1. Storwize V7000 Unified hardware components
21