Removing The Fan Bracket - IBM Storwize V7000 Unified Problem Determination Manual

Pins
Figure 61. Removing the fan bracket
Procedure
1. Read the safety information that begins on page Safety and "Installation
2. Follow the procedure in "Removing a file module and disconnecting power" on
3. Remove the cover. For more information, see Removing the cover.
4. Remove the fans.
5. Remove the PCI riser-card assemblies. For more information, see Removing a
6. Press the fan-bracket release latches toward each other and lift the fan bracket
Installing the fan bracket
The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
your request, you will be charged for the installation. Service agreements can be
purchased so that you can ask IBM to replace these units.
About this task
To install the fan bracket, complete the following steps.
140
Storwize V7000 Unified: Problem Determination Guide 2073-720
Fan-bracket
release latches
guidelines" on page 94.
page 92 to suspend the file module from the cluster and shut it down and
disconnect all power cords and external cables.
PCI riser-card assembly.
out of the file module.