Table of Contents
Advertisement
Make a setting of "Inst./Avg." or "Wet/Dry" of the measurement value displayed on the "Measurement"
screen.
Setting items
"Inst./Avg."
"Wet/Dry"
Select "Display/Output" from the "Menu" screen, and press the
6.6.1 Instantaneous/average value
Make a setting of "Instantaneous value" or "Average value" for each measurable component. The setting is
reflected on the display on the "Measurement" screen.
● You can set the instantaneous value and the average value for the O
of measured value.
● If you select the average value, the analyzer provides moving averages obtained based on the time you set
in the "Moving average time" of the parameter setting screen.
Remote switching between the instantaneous value and the average value (DI2 terminal)
Applying a voltage to the optional DI2 terminal allows you to switch between instantaneous value and the
average value. If the measured value has been set to the instantaneous value and the O
average value, applying a voltage change the measured value to the average value and the O
the instantaneous value.
6.6 Display/AO setting
: Select "instantaneous value" or "average value" for each measurable com-
ponent.
: Select "Wet" or "Dry" for each measurable component. When "Dry" is set,
H
O setting of the "Analog Input" is required.
2
NT
key.
conversion regardless of the setting
2
- 74 -
conversion to the
2
conversion to
2
INZ-TN8ZSS-E
Advertisement
Table of Contents
