Fuji Electric ZSS-8 Series Instruction Manual page 60

6.2.3.3 Procedure of span calibration
In [Menu] screen, point the cursor to [span
calibration] with
press NT .
Point the cursor to [Component] with
and then press the
out the cell.
Select the [H O] with
2
press NT .
Point the cursor to [Cell Length] with
and then press the
out the cell. Input the length of measurement
cell with
- 50 -
and then
key to reverse
and then
key to reverse
and then press NT .
INZ-TN8ZSS-E