6.10.2 Changing the relay contact
Open the cover of the control unit. Change the position of the shorting plug for the switch.
Function
SW1...SW6
Digital output change
SW1: DO1 (Light intensity low)
SW2: DO2 (Device failure)
SW3: DO3 (During hold / during calibration)
SW4: DO4 (Overrange/underrange)
SW5: DO5 (Environmental error)
SW6: DO6 (Power interruption)
Between 1 and 2
SPST-NC
- 88 -
Between 2 and 3
SPST-NO
INZ-TN8ZSS-E