Table of Contents
Advertisement
5.3.2 "Menu" screen
ODE
Press the
key while the "Measurement" screen is displayed, and the "Menu" screen appears. (It does
not appear when pressing the
display the "Measurement" screen, and then press the
5.3.2.1 Name (functions)
(1)
Zero Calibration ············ Used for performing zero calibration.
(2)
Span Calibration ············ Used for performing span calibration.
(3)
Alarm Log ··················· Displays the alarm occurred in the past.
(4)
Alarm Setting ··············· Used for setting range of upper/lower limit alarm or analog output range
(5)
Output Hold ················· Used for holding analog output.
(6)
Parameter Setting ·········· Used for setting each parameter.
(7)
Display / Output ············ Used for setting the measurement value to be displayed on the "Meas-
(8)
Input Signal ················· Used when analog input range or fixed value are set for concentration
(9)
AO Select ··················· Used to determine what to output to the analog output terminal.
(10) Analyzer Information ······ Display the calculation information of concentration.
INZ-TN8ZSS-E
ODE
key while other screen is displayed. In that case, Press the
of the measurement value.
urement" screen such as switching "Instantaneous value / Average val-
ue" or "Wet / Dry".
correction or air purge alarm.
(It is user for trouble analysis)
- 35 -
ODE
key.)
key to
5+
Advertisement
Table of Contents
