Fuji Electric ZSS-8 Series Instruction Manual page 116

3. Optical axis adjusting tool
You can adjust the optical axis by aiming the laser pointer to the center of the target.
3.1 Optical axis adjusting tool
(1) Optical axis adjusting tool (laser pointer)
Optical axis adjusting tool (target)
3.2 BNC cable for optical adjustment
After installing the transmitter unit, the receiver unit, and the control unit, connect a digital voltmeter through
the BNC cable to the transmitter unit or the receiver unit. Adjust the optical axis so that the voltage indicated
on the voltmeter becomes the relevant value.
Item
BNC cable for optical adjustment
Item
Q'ty
1 ZZP*ZSSTQ505298C1
- 106 -
Q'ty Model
1 set ZZP*ZSSTQ404743C1
Model
INZ-TN8ZSS-E