Fuji Electric ZSS-8 Series Instruction Manual page 64

6.3.2 Setting of alarm value
Make a setting of the High/Low limit alarm for the measured concentration. To change the alarm setting, set
the Alarm ON/OFF setting to ON, and then change the numeric value.
Note
Point the to "H-Limit" to change the setting of H-Limit value, and point "L-Limit" to change the set-
ting of the L-Limit value.
( )
NT
( )
- 54 -
Select "ON" or "OFF" by the
key, and press the
When you press the NT
to the initial position.
Point the to "H-Limit" to set the H-limit val-
ue, and point "L-Limit" to set the L-Limit value,
and then press the
key or the
key.
key, the cursor returns
key.
INZ-TN8ZSS-E