Fuji Electric ZSS-8 Series Instruction Manual page 95

INZ-TN8ZSS-E
This device has the simulation output function.
Point the cursor to "Output Fine Tuning" at the
bottom and press the
from "Meas Output", "Zero Output", "Half Out-
put", or "Span Output" by the
key, and press the
Selected analog output adjustment is performed
on all outputs.
Point the cursor to the analog output to be ad-
justed while "Zero output" is selected for Analog
fine adjustment, and press the
The cursor then moves to 4-digit numeric value
in the "Zero" column, press the
key to adjust the output.
Press the key, and the "output fine tuning"
will change to "Span Output" and the cursor will
move to numeric values on the first row of the
span.
Edit the value by using the
- 85 -
NT key. Select an item
key or the
NT
key.
NT key.
key or the
keys.