Fuji Electric ZSS-8 Series Instruction Manual page 66

Cross stack laser gas analyzer

Table of Contents

6.3.3 Analog output / alarm record

Set the recording range of the external alarm output such as analog output or the alarm record.

Setting range can be selected from "H-Limit", "L-Limit" and "H/L Limit".

Note

When "OFF" is set to the ON/OFF setting of the alarm value, "Analog Output / Alarm Record" cannot be

set. Select "ON" again. The alarm output which is "H-Limit", "L-Limit" or "H/L Limit" cannot be per-

formed for 5 minutes after turning on the power.

Explanation of alarm range

Range H-Limit

Range L-Limit

Range H/L-Limit : Alarm output is provided when a value exceeds the Range H-Limit or it is lower than

(

)

(

)

: Alarm output is provided only when a value exceeds the Range H-Limit.

: Alarm output is provided only when a value is lower than Range L-Limit.

Range L-Limit.

Point the

to "Analog Output / Alarm Record"

by the

key and the

the

key.

Select output range by the

key, and press the

- 56 -

key, and press

key and the

key.

INZ-TN8ZSS-E

Table of Contents