6.3.4 Hysteresis setting
Set the hysteresis to prevent possible chattering of the alarm output near the alarm setting value.
Setting Range
0 to 20% FS
%FS: Indicates the rate for which the range width of each component is regarded as 100%.
INZ-TN8ZSS-E
(
)
(
)
NT
- 57 -
Point the
to "Hysteresis" by the
the
key, and press the
Change the numeric value by the
the
key, and move the digit by the
key.
Press the
NT
key to make the hysteresis valid.
key or
key.
key or