Table of Contents
Advertisement
6.5.2 Purge length
The "purge length" setting is required only for the O
not have to edit this parameter.
Setting range: 100–15000 mm
If you ordered the "blast purge" option, you have to set the "blast purge" column as well.
INZ-TN8ZSS-E
analyzer for combustion control. In other cases, you do
2
(
)
(
)
NT
(
)
NT
- 65 -
Move the cursor to "Purge Length" by using the
keys, and press the
Edit the value by using th
change the value, and the
the next digit. Press the ENT key to set the value.
(The cursor will move to "Blast Purge".) The
"Purge length" setting is completed.
If you ordered the "blast purge" option, move on
to the next step.
Select "Blast Purge" or "None" by using the
keys, and press the
Press the
NT
key twice, and the cursor returns
to the initial position.
key.
keys to
key to move to
NT
key.
Advertisement
Table of Contents
