Table of Contents
Advertisement
6.7.2 Analog input setting: fixed value
The description here is an example of the H
In such cases that the gas conditions do not change, that no external sensor is available, or that no analog in-
put terminals are left, set a fixed value. Note that if there is a large difference between the setpoint and the
actual value, the analyzer may not be able to deliver accurate measurement.
O input.
2
(
)
(
)
NT
(
)
NT
- 80 -
Select "H
O" by the
2
Press the
key to move the cursor to
"Channel" setting.
Select "Fixed" by the
key, and press the
NT
key.
Enter the fixed value.
Change the numeric value by the
the
key, and move the digits by the
key. Press the
NT
key to validate the set input
value.
key or the
key.
key or the
key or
INZ-TN8ZSS-E
Advertisement
Table of Contents
