Post Installation Checklist - Avaya J129 Installing And Administering

Initial setup and connectivity
2. The phone contacts the provisioning server to download the firmware upgrade file,
J100Supgrade.txt.
3. In J100Supgrade.txt, the APPNAME parameter contains the firmware version.
4. The phone compares the currently installed software version with the version specified in the
APPNAME parameter.
5. If the firmware version specified in the APPNAME parameter is higher, the phone downloads
the software files for upgrade.
6. The phone automatically restarts to apply the upgraded firmware
Tip:
The upgrade events are logged under NOTICES level in the Syslog file.

Post installation checklist

To ensure that the phone is properly installed and running properly, verify that the following
requirements are complete.
No. Task
1 Has the phone acquired an IP
address?
2 Are you able to make a call from the
phone?
3 Are you able to perform backup-
restore?
3 Are you able to modify the phone's
Settings file parameters and end user
settings.
4 Are you able to upgrade your phone?
5 Have you installed the appropriate
private network authentication
certificates?
6 It is critical that you verify Emergency
calling is working properly in your
network. It may be necessary to make
arrangements with the appropriate
authorities to test this functionality.
November 2017 Installing and Administering Avaya J129 IP Phone in third-party call control setup
Reference
Configuration parameters
page 68
Device upgrade process
page 41
For more information, see
Administering emergency
numbers
Comments on this document? infodev@avaya.com
on
on
42