Parameter Setting Example; Safety Master Station Network Parameter Setting - Mitsubishi Electric MELSEC QS Series User Manual

6
PARAMETER SETTING

6.3 Parameter Setting Example

This section explains the parameter setting on GX Developer. For details on the GX
Developer operation, refer to the GX Developer Operating Manual.
The explanations in this section are based on the following system configuration example.
I/O module
Station No. :1,1 occupied
station, 16-point input/
16-point output
Standard remote I/O station

6.3.1 Safety master station network parameter setting

(1) The following is an example of the parameter settings. See (2) for actual
6
- 4 6.3 Parameter Setting Example
6.3.1 Safety master station network parameter setting
Safety CPU module
Safety master module
Device module
Station No. : 2
2 occupied stations
Remote
device station
settings.
Safety refresh monitoring time: 200ms
Safety data monitoring time: 400ms
Link ID: 1
Transmission speed: 2.5Mbps
Synchronous mode
Device module
Station No. : 4
2 occupied stations
Remote
device station
I/O module
I/O module
Station No. : 6
Station No. setting 6
1 occupied station
1 occupied station
8-point input/4-point output
8 points for input/4 points for output
Production information: 2001
Production information 2001
Safety remote I/O station