Install Traditional Log Kit 1400Lsk - Valor H6 Series Installation And Owner's Manual

QUALIFIED
INSTALLER

Install Traditional Log Kit 1400LSK

Material required
• Log set containing:
•
1 grate
•
7 logs
•
3 bags of loose coal pieces
• Gloves, if desired
Installation
Unpack the ceramic logs very carefully to avoid
damaging them. Install the logs as shown below.
Please note that the position of the logs is critical to
insure proper performance of the appliance.
1. Place the grate securing it by inserting the tabs in
the slots at the front edge in the burner platform
cavity. Center the grate with the burner cavity.
top view of burner
slots for grate's tabs
2. Spread 2 bags of coals on the burner in an even
layer. Save the 3rd bag for later.
58
Installation
3. Place the right rear log inserting the grate's right
side support into the slot on the underside of the log
and resting the log's end on the rear middle tine of
the grate as indicated.
Leave a 1-1/2" gap between the log
and the front inside edge of the grate.