Install Decorative Glass Set 1400Dgs - Valor H6 Series Installation And Owner's Manual

Install Decorative Glass Set 1400DGS

Material required
• Decorative Glass Set containing:
•
1 metal tray
•
1 pilot shield
•
3 bags of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
The pilot shield provided with this kit is not necessary.
Discard or recycle.
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the metal tray over the burner cover.
2. Carefully fi ll the metal tray by hand with fi reglass,
leveling it with the top of the tray's fl ange.
Installation
NOTE: Ensure the pilot area is clear of glass
particles. No more than one layer directly in front of
pilot; a few glass pieces can be put on top of pilot
shield.
CHOKING HAZARD! Ensure that the fi replace
area is clear fi reglass particles as these could be
ingested by small children. Vacuum area after
installation.
QUALIFIED
INSTALLER
pilot area
! WARNING
57