Table of Contents
Advertisement
Installation
Traditional Log Kit 1000LSKV2
Material required
• Traditional Log Kit, which contains:
• 10 logs
• 2 cups of embers, bagged
• Gloves, if desired
H32
H33
H10
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on the burner platform, or other
logs.
Install the logs as shown below.
1. Place log H11 into the right hole in the front of the
burner cover. Note the angled feature of H11 should
be pointed to the right side.
28
H34
G16
H28
G10
H31
G4
H11
2. Place log H10 into the left hole in the front of the
burner cover.
3. Place log H32 onto the rear support bracket, and
slide it as far to the right as it will travel, gently
resting the log against the pilot shield.
4. Place log G4 directly on the burner, its underside
groove fi tting on the front raised fl ange of the
burner. Slide the log all the way to the left.
H11
H10
H32
G4
G4
Fuel Beds
Advertisement
Table of Contents
