Valor H6 Series Installation And Owner's Manual page 45

Installation
1. Unpack the 1430 kit checking that you have all the
pieces on hand.
Upper panel
Side stand-off
LH side
panel
Barrier
screen
Kit content
2. On the top of the appliance's case in front of the
stand-off s, remove the positioning brackets (2
screws each).
On top, each side of
the window, remove the
convection brackets (1 nut/
side); they are not used with
this kit.
3. On the sides of the appliance case, install the side
stand-off s (2 screws each).
Installation
Upper
panel
support
LH side
door
Side stand-off
RH side
door
Removable
panel
RH
side
Lower panel
panel
4. Fit the upper panel support to the top of the
appliance's case as indicated (4 screws).
5. At the bottom of the appliance case, install the lower
panel provided with the kit, as indicated (3 nuts).
6. On the appliance, install the side panels as
indicated (3 screws per side).
QUALIFIED
INSTALLER
45