Installation
Traditional Log Kit 739VLSK
Material required
• Traditional Log Kit, which contains:
• 7 logs
• 3 ember chunks
• 1 2-cup bag of embers
• Gloves, if desired, not included
G21
G4
H28
G20
G16
26
G9
G10
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help place them.
1. Install G4 ember bed onto the burner, placing the
groove under the log on the burner's front top rail
as indicated.
G4
Ember bed G4 installed
2. Place embers, by hand, in the cavity in front of the
burner as indicated.
3. Place log G21 behind the burner on the fuel bed
support and slide it forward until it touches the
front vertical tabs of the support. Slide the log to the
right so it rests against the pilot shield.
G21
G4
Fuel Beds