Valor H6 Series Installation And Owner's Manual page 49

Fit Appliance to Framing
1. Install side brackets on each side of the appliance
(2 screws per bracket). Use the hole or the slot
according to the thickness of the wall fi nish—see
page 47.
2. Taking great care not to cut your hands on the sheet
metal edges, lift the appliance out of its packing
base and place it in the framing. Make sure that the
unit is at the right height with consideration to the
height of the hearth or combustible fl ooring.
When setting the position of appliance within
framing, the front surface of the prositioning bracket
indicated should always be fl ush with where you
anticipate the fi nished wall surface to be. Adjust the
position of the side brackets to suit.
If in doubt, allow for slightly less material
thickness as the trims have additional 3/4"
of adjustment.
surface of positioning
bracket
Installation
Complete Installation of optional LDK
HeatShift Duct Kit (if used)
See installation instructions packed with the LDK kits
for details.
QUALIFIED
INSTALLER
49