Table of Contents
Advertisement
Installation
Install Traditional Log Kit 1000LSK
Material required
• Traditional Log Kit, which contains:
• 13 logs
• 1 x 0.180 lb bag of embers (not pictured)
• Gloves, if desired
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on the burner platform, or other
logs.
Install the logs as shown below.
1. Place log H11 into the right hand side of the cavity in
front of the burner.
2. Place log H10 into the left hand side of the cavity in
front of the burner.
3. Place log H4 directly on the burner, behind H10 and
H11. Its underside groove fi ts on the front raised
fl ange on top of the burner; slide the log all the way
to the left.
4. Place both H5 logs on either side of the H4 log at the
ends of the burner. You may need to gently press the
logs into the ends stops of the burner.
Fuel Beds
51
Advertisement
Table of Contents
