Remove Window; Fit Optional Ldk Heatshift Duct Kit's Take-Off Collars To Appliance (If Used) - Valor H6 Series Installation And Owner's Manual

QUALIFIED
INSTALLER

Remove Window

The window is held in place by a spring-loaded lever on
each side.
1. To remove the window, locate the levers on each
side of the window towards the top. Using your
fi nger, pull the lever towards you and unhook it from
the window frame bracket.
2. Gently pull the top of the window outward.
3. Lift the window out of its bottom support railing and
set it aside in a safe place to avoid damage.
Section Views
Fit optional LDK HeatShift Duct Kit's take-off
collars to appliance (if used)
See installation instructions packed with the LDK kits
for details.
42
Installation
Window
frame
Bottom support railing