Install Decorative Glass Murano 1400Dgm - Valor H6 Series Installation And Owner's Manual

QUALIFIED
INSTALLER

Install Decorative Glass Murano 1400DGM

Material required
• Decorative Glass Murano kit containing:
•
1 glass platform
•
1 glass square pad
•
2 platform retainers
•
1 bag of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
The pilot shield provided with this kit is not necessary.
Discard or recycle.
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the two platform retainers as indicated.
2. Install the glass platform on top of the retainers.
56
Installation
3. Place the square glass pad behind the pilot shield
aligning it to the edge of the plate.
4. Carefully spread the glass by hand on top of the
burner within the platform opening.
NOTE: Ensure the area within the pilot area is clear
of glass particles. No more than one layer directly in
front of pilot; a few glass pieces can be put on top of
pilot shield.
pilot area
CHOKING HAZARD! Ensure that the fi replace
area is clear fi reglass particles as these could be
ingested by small children. Vacuum area after
installation.
! WARNING