Valor H6 Series Installation And Owner's Manual page 59

Direct vent zero clearance gas fireplaces
Hide thumbs Also See for H6 Series:
Table of Contents

Advertisement

4. Place the left rear log on the grate's left side support
and resting the log's end on the fl at space on top of
the right rear log as indicated.
Leave a 2-3/4" gap between the log and the front
inside edge of the grate.
Installation
5. Place the right front log resting its notch against the
grate's second tine as indicated. Orient the narrow
part of the log towards the pilot.
Pilot
6. Place the lower rear log's notch on the grate's rear
support under the left rear log as indicated.
QUALIFIED
INSTALLER
59

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H6 1400knH6 1400kp

Table of Contents