Valor H6 Series Installation And Owner's Manual page 9

Direct vent zero clearance gas fireplaces
Hide thumbs Also See for H6 Series:
Table of Contents

Advertisement

Setting ºC/24-hr or ºF/12-hr
clock
In MAN mode, press
+
until temperature / clock display
changes from
°F / 12-hour
°C / 24-hour
Setting Time
The time display will ash after either:
- installing the battery, or
- pressing
+
To set the time, press buttons:
= hour
= minutes
Press
or wait to go back to MAN.
Modes of Operation
Brie y press SET cycles through modes
of operation.
>
>
>
TEMP
M A N
>
>
TIMER
T E M P
M A N
NOTE: Press
or
to reach
mode.
M A N
Set the di erent parameters when
they are ashing.
Using the Remote Control
buttons
>
Manual Mode
M A N
Manual ame height adjustment.
Daytime Temperature Mode
TEMP
When pilot is lit, room temperature
is measured and compared to set
temperature. Flame height automatically
adjust to reach Daytime Set
Temperature.
Light/Dimmer Mode
Not available on this replace.
Fan Mode
Turns fan ON and OFF and adjusts speed.
Note: To turn fan OFF, press
disappear.
Night time Setback
T E M P
Temperature Mode
When pilot is lit, room temperature
is measured and compared to set
temperature. Flame height automatically
adjust to reach Night Time Setback
Temperature.
Timer Mode
TIMER
When pilot is lit, two periods of time (P1
and P2) can be programmed to go ON
and OFF at speci c times.
Note: Display shows set temperature
every 30 seconds.
OWNER'S
INFORMATION
until all 4 bars
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

H6 1400knH6 1400kp

Table of Contents