Install Traditional Log Kit 700Lsk - Valor G3.5 Installation Manual

Installation

Install Traditional Log Kit 700LSK

Material required
• Traditional Log Kit, which contains:
• 10 logs
• 1 bag of embers
G7 G7
G4 G4
H10 H10 H11 H11
• Gloves, if desired
Installation
Carefully unpack the kit. Note each log has its own
number stamped on the bottom. Some logs have pegs
to help you place them on the burner platform, or other
logs.
Install the logs as shown below.
1. Confi rm the front edge of the rear log support is
fl ush with the cutout in the burner support
platform.
G9 G9
G8 G8
G10 G10
G16 G16
H28 H28
H31 H31
2. Place log G4 directly on the burner, and slide it all
the way to the left. There is a groove on the
underside of the log that fi ts on the front rail on the
burner.
3. Place log H10 in the front left cutout in the burner
platform with its long end pointed to the left.
longer on
left side
H10
4. Place log H11 in the front right cutout in the burner
platform. Orient the H11 with its angled end
pointing to the right.
H10
Fuel Beds
G4
G4
G4
Angled
H11
end
23