Install Decorative Glass Set 1104Dgs (1100 Models) - Valor 1100JN Installation & Owner's Manual

QUALIFIED
INSTALLER
Install Decorative Glass Set 1104DGS
(1100 models)
Material required
• Decorative Glass Set, which contains:
•
1 metal tray
•
1 pilot cover
•
3 bags of clear 1/2" fi reglass
• Gloves (recommended to manipulate glass)
Installation
Carefully unpack the kit. Wear gloves to handle the
fi reglass.
1. Install the metal tray over the ceramic burner.
2. Remove the existing pilot shield (2 screws).
3. Place the pilot cover on top of the metal tray
spanning over the pilot cut-out.
58
Installation
4. Carefully fi ll the metal tray with fi reglass, leveling it
with the top of the tray's fl ange.
NOTE: Ensure the pilot area is clear of glass
particles.
CHOKING HAZARD! Ensure that the fi replace
area is clear fi reglass particles as these could be
ingested by small children. Vacuum area after
installation.
WARNING
!