Install Decorative Glass Set 2200Dgs - Valor LX2 Series Installation & Owner's Manual

QUALIFIED
INSTALLER

Install Decorative Glass Set 2200DGS

Material required
• Small container to distribute fi re glass (not supplied)
• Decorative Glass set, which contains:
◊ 4 bags of clear fi reglass
Installation
Carefully unpack the kit.
Carefully spread the fi reglass by hand on the surface
of burner and the media tray covering the edge of
the burner. Do not pour from the bag to avoid fi ne
particles blocking the burner ports.
Use one bag of fi reglass for the burner, one for the rear
media tray and one for the front media tray. Use the
fourth bag to fi ll up gaps or edges of the burner.
Decorative Glass Set installed
52
INSTALLATION
CHOKING HAZARD! Ensure that the fi replace
area is clear of fi reglass particles as these could
be ingested by small children. Vacuum area after
installation.
IMPORTANT: Approved for use only with the fi reglass
provided with your Valor fi replace The use of any other
fi reglass products may void your fi replace warranty.
NOTE: Ensure the areas within the pilot shield and
pilot safe zone are clear of fi reglass.
WARNING
!
Pilot shield
Pilot safe zone